在線可拆裝式靶式流量計安裝說明

Online detachable target flowmeter
Installation instructions

安裝配件  

Installation Accessories

1、可伸縮流量計裝置；

1, retractable flowmeter device;                

2、球閥；

2、Ball valve;

3、焊接短管。

3、Welding short tubes.

安裝過程

Installation process

1、将焊接短管焊在管道上；

1, welding welded short pipes on the pipeline;

2、将球閥用螺栓固定在焊接短管上；

2, the ball valve is bolted to the welded short pipe;

3、将可伸縮流量計裝置用螺栓固定在球閥上；（注意😗：按✍🏻箭頭指示👨🏻‍🏭方向固定）

3, the retractable flowmeter device is bolted to the ball valve; (Note: Fixed by arrow direction)

4、全部固定完畢後，緩慢打開球閥，将流量計緩慢旋🧜🏼‍♂️進管道🛀🏼，旋到位後按所銑箭槽對準成一字線（保證靶片正對流體😝方向）,然後将6枚鎖緊螺絲緊固後再調整儀表零點即可。

4, after all the fixed, slowly open the ball valve, slowly rotating the flowmeter into the pipeline, after the rotation is in place, aligned with the milling arrow slot into a line(ensure that the target is in the direction of the fluid), Then tighten the six locking screws and adjust the instrument zero point.